Whirlwind RoughRider

Manufacturer Product Number	RR12514	RR14014	RR15514	RR17016	RR18516
Seat Width	12.5’’ (32 cm)	14” (35.5 cm)	15.5” (39.5 cm)	17” (43 cm)	18.5’’ (47 cm)
Seat Depth	14’’ (36cm), 16’’ (41cm), 18” (46cm); adjustable		16″ (41 cm)
Seat Angle	12˚
Seat Height	19.3” (49 cm) at front of seat 16.5” (42 cm) at back of seat Seat Height measurement is based on 15.5” (39.5 cm) Seat Width. Seat Height varies +/1.2” (3.05 cm) with other Seat Widths. Variance in seat height affects effective Back Height, and effective Back Angle Bend.
Back Height	Adjustable, 14” (36cm), 16” (41cm), 18” (46cm)
Back Angle	Lower Back Support Angle: fixed at 8 degrees Upper Back Support Angle: 8 degrees, 12 degrees, 15 degrees, custom Upper Back Support Angle describes the angle of the back above the Lumbar area. At 8.75” above the seat the back tilt increases from 8 degrees to desired tilt.
Footrest Height	12” – 17’’ (30 cm – 43 cm) – from seat to footrest
Rear Wheel Dimensions	24” x 1.75” (61 cm x 4 cm) Standard Size 1.5” – 2.1” (4 cm – 5 cm) Wide Tires Available for All Sizes
Rear Wheel Axle Adjustability	5 – Position Adjustable +/0.8”
Caster Dimensions	4.5”x 3” (11 cm x 8 cm)
Overall Width Open	21.5” – 28.5” (55 cm – 72 cm)
Overall Width Closed	Not specified by manufacturer
Overall Length	38.7” – 41.85” (98 cm – 106 cm) Overall length is the distance from the front to the back of the chair. This distance varies with axle position.
Product Weight	44 lb (20 kg) with Whirlwind Super Duty Mountain Bike Wheels
Weight Capacity	220 lb (99.8 kg) Max Rider – Tested Weight
Certification	CE, FDA, ISO 9000, ISO 7176
Warranty	For details on the CLASP warranty, click here.

 

Basic tool kit included:

• 2 Multi-Function Spanners
• 1 Hex Wrench
• 2 Hex Bolts 12 x 120 mm
• 2 Hex Nuts with Nylon Lock Insert
• 2 Hex Bolts and Nuts 10 x 30 mm
• 1 Bushing, Wheel Spacer
• 1 Support Bushing, Wheel Spacer
• 1 14” Seat Back Strap
• 1 14” Seat Extender Assembly
• 1 Bicycle Tube Repair Kit

Product Information Sheet

Download

RoughRider User Manual

Download

RoughRider Assembly Guide

Download

Assembly and Adjustment Videos

• RoughRider Wheelchair Assembly
• Brake Adjustment
• Backrest Height And Tensionable Straps
• Footrest Height
• Caster Installation
• Rear Wheel Installation
• Seat Extension

Rugged mobility products are designed for environments that have higher impacts, more humidity, and generally more severe requirements than standard indoor wheelchairs are designed for. These wheelchairs are stronger and allow the user to roll off short curbs up to 15 cm high, roll over small obstacles, and go over some unpaved surfaces. Rugged mobility products are not designed for skate parks, outside storage, racing, going down stairs, or being dropped from a height more than 15 cm – such as off of a bus or vehicle.

Important:  This wheelchair should be provided by a therapist trained in the Wheelchair Service Training Package – Basic Level.